Einzelheiten zu den Produkten

Haus Produits

Oilfield Grade Polyacrylamide Powder 0.1 to 0.5% Working Concentration for Drilling Fluid Loss Control

Name: Oilfield Grade Polyacrylamide Powder 0.1 to 0.5% Working Concentration for Drilling Fluid Loss Control
Brand: Yixing Bluwat Chemicals Co., Ltd.
SKU: Blufloc
Price: 649.80 USD
Availability: InStock

Markenbezeichnung:	BLUWAT
Modellnummer:	Blufloc
Mindestbestellmenge:	1000 kg
Preis:	verhandelbar
Lieferzeit:	Innerhalb von 7-10 Werktagen
Zahlungsbedingungen:	D/A, D/P, L/C, T/T, Western Union

Detailinformationen

Produkt-Beschreibung

Detailinformationen

Herkunftsort:

China

Zertifizierung:

ISO9001, SGS, BV

Name:

Polyacrylamid für eine verbesserte Ölrückgewinnung

Handelsname:

Blufloc HA7525

Molekulargewicht:

hohes Molekülgewicht

Ionischer Typ:

Anionisch

Aussehen:

Cremefarbenes Granulatpulver

Partikelgröße:

20 bis 100 Mesh

Molekulargewichtsklasse:

Bis zu 25 Millionen

Anionengrad:

Bereich von 5 bis 100 Prozent

solider Inhalt:

Mindestens 89 Prozent

Schüttdichte:

Ungefähr 0.8

Restmonomer:

Maximal 0,05 Prozent

Empfohlene Arbeitskonzentration:

0,1 bis 0,5 Prozent

pH-Wert einer 1-prozentigen Lösung:

Etwa 6 bis 8 für den anionischen Typ

Haltbarkeit:

2 Jahre

Verpackung:

25-kg-Sack oder 750-kg-Big-Bag

Verpackung Informationen:

25-kg-Sack oder 750-kg-Sack

Produkt-Beschreibung

BLUFLOC Oilfield Grade Polyacrylamide Powder for Drilling Fluid Loss Control

BLUFLOC Oilfield Grade Polyacrylamide Powder is a high performance water soluble polymer designed for oil and gas drilling applications. It can be prepared at a recommended working concentration of 0.1 to 0.5 percent and used as a functional additive in water based drilling mud systems.

Oilfield Grade PAM Powder 0.1 to 0.5 Percent Working Solution Drilling Fluid Loss Control Water Based Drilling Mud Shale Stabilization Factory Direct Supply

Product Overview

In drilling operations, fluid loss control is one of the key requirements for stable mud performance. Excessive filtrate loss may cause water invasion into sensitive formations, shale swelling, borehole instability, poor mud cake quality and higher drilling risk.

BLUFLOC polyacrylamide helps improve drilling fluid structure, support filtration control and enhance the stability of the mud system.

This product is suitable for drilling fluid loss control, shale stabilization, drilling mud viscosity support, lubrication improvement, cuttings suspension and selected oilfield wastewater or mud water treatment applications.

Key Product Features

Oilfield Grade PAM Powder

Water soluble polyacrylamide powder designed for oil and gas drilling applications.

Practical Working Concentration

Recommended working concentration from 0.1 to 0.5 percent supports field solution preparation and dosing control.

Fluid Loss Control Support

Suitable for drilling fluid loss control in water based mud systems.

Mud Structure Improvement

Helps improve mud structure and filtration behavior for better mud system stability.

Shale Stabilization

Supports shale stabilization and borehole wall protection in sensitive formations.

Rheology Improvement

Can improve drilling mud viscosity, suspension and rheological performance.

Lubrication Support

Helps enhance lubrication during drilling mud circulation and drilling operation.

Cuttings Suspension

Supports cuttings suspension and carrying capacity in water based drilling fluid systems.

Stable Powder Quality

20 to 100 mesh granular powder and minimum 89 percent solid content support stable industrial handling.

Economical Field Use

Low dosage requirement helps improve cost efficiency in oilfield drilling mud applications.

Technical Specifications

Item	Specification
Product Name	Oilfield Grade Polyacrylamide Powder
Brand	BLUFLOC
Recommended Type	Anionic Polyacrylamide
Appearance	Off White Granular Powder
Particle Size	20 to 100 Mesh
Molecular Weight Range	5 to 25 Million for Anionic Type
Anionic Degree Range	5 to 100 Percent
Solid Content	Minimum 89 Percent
Bulk Density	About 0.8
Residual Monomer	Max 0.05 Percent
Recommended Working Concentration	0.1 to 0.5 Percent
pH of 1 Percent Solution	Around 6 to 8 for Anionic Type
Storage Temperature	0 to 35 Degree C
Shelf Life	2 Years
Package	25 kg Bag or 750 kg Big Bag
Available Documents	TDS, MSDS and COA

Main Applications in Oilfield Drilling

Drilling Fluid Loss Control

BLUFLOC Oilfield Grade Polyacrylamide Powder helps support fluid loss control in water based drilling mud systems. By improving the polymer structure of the mud, it can help reduce excessive filtrate loss and support better borehole protection.

Water Based Drilling Mud Additive

This product can be used as a functional additive in water based drilling fluid systems. It helps improve mud viscosity, suspension, lubrication and stability according to the selected grade and dosage.

Shale Stabilization

In shale and clay rich formations, water invasion may cause swelling, dispersion and borehole instability. BLUFLOC PAM helps support shale stabilization by improving drilling fluid performance.

Borehole Wall Protection

A stable drilling fluid system can help protect the borehole wall. Polyacrylamide supports better mud structure and helps improve the overall stability of the drilling process.

Lubrication Support

After proper dissolution, polyacrylamide forms a polymer solution that can improve lubrication in water based drilling mud. Better lubrication helps reduce friction during mud circulation and drilling operation.

Viscosity and Rheology Improvement

Oilfield grade PAM can help improve drilling mud viscosity and rheology. This supports better suspension of cuttings, smoother circulation and more stable mud performance.

Cuttings Suspension

High molecular weight polyacrylamide helps improve the carrying capacity of drilling fluid. This helps suspend and transport drill cuttings more effectively during circulation.

Oilfield Wastewater Treatment

Besides drilling fluid application, BLUFLOC PAM can also be used in selected oilfield wastewater clarification, drilling mud water treatment and solid liquid separation processes.

Customized Grade Selection

Bluwat can recommend HA7525, AA6518 or other customized anionic PAM grades according to drilling fluid requirements and field conditions.

Why 0.1 to 0.5 Percent Working Concentration Matters

The recommended working concentration of 0.1 to 0.5 percent is practical for oilfield operation because it provides a balance between viscosity, dosing control and solution handling.

Easier Pumping and Distribution

A lower concentration solution is easier to pump and distribute in field dosing systems.

Reduced Lumping Risk

A properly prepared polymer solution helps avoid lumping and uneven dosing.

Consistent Mud Performance

Stable concentration control supports more consistent drilling fluid performance.

Better Cost Efficiency

Correct solution preparation helps reduce waste and improve field cost efficiency.

For oilfield drilling fluid loss control, the polymer should be fully dissolved before being added into the mud system. Incomplete dissolution may reduce filtration control, viscosity performance and overall mud stability.

Working Mechanism

After the powder is dissolved in water, the polymer chains form a viscous solution. When added into the drilling mud system, this solution can help improve mud structure, increase viscosity, support suspended solids control and reduce excessive fluid loss.

The polymer also helps improve the interaction between fine particles in the mud system, supporting better filtration behavior and more stable drilling fluid performance.

Typical Problems This Product Can Help Improve

Excessive fluid loss in water based drilling mud

Poor mud cake quality

Shale swelling and dispersion

Borehole instability

Low or unstable drilling mud viscosity

Weak cuttings suspension

High friction during drilling circulation

Unstable mud performance under field conditions

Need for low dosage oilfield polymer additive

Need for practical 0.1 to 0.5 percent polymer working solution

General Dosing Guidance

The actual dosage depends on drilling mud formulation, water quality, salinity, temperature, mud density, shale activity, target fluid loss level and required viscosity.

Laboratory testing or field trial is recommended before large scale use. For drilling fluid loss control, the product should be tested with the existing mud system to confirm compatibility with other additives such as salts, fluid loss reducers, lubricants, weighting agents, pH adjusters and viscosifiers.

Bluwat can provide product selection support and dosing recommendations according to customer field requirements.

Product Advantages for Oilfield Buyers

Practical Working Concentration

Recommended working concentration from 0.1 to 0.5 percent supports stable solution preparation and field dosing.

Fluid Loss Control Support

Suitable for drilling fluid loss control in water based drilling mud systems.

Shale and Borehole Stability

Supports shale stabilization, borehole stability and borehole wall protection.

Mud Viscosity and Lubrication

Can improve drilling mud viscosity, rheology and lubrication performance.

Water Based Mud Compatibility

Useful for water based drilling mud systems requiring filtration control and stable performance.

Stable Powder Quality

Minimum 89 percent solid content and 20 to 100 mesh granular powder support reliable field use.

Low Dosage and Economical Use

Low dosage requirement helps reduce field chemical cost and total treatment cost.

Factory Direct Supply

Factory direct supply from China with stable product quality and technical support.

Technical Documents Available

TDS, MSDS and COA are available for oilfield buyers and distributors.

Customized Grade Options

Customized molecular weight and anionic degree can be selected according to field requirements.

Packaging and Storage

Packaging

25 kg kraft paper bag with inner PE liner
750 kg jumbo bag available
OEM packaging available according to order requirement

Storage

Store in a cool, dry and ventilated place
Avoid direct sunlight and moisture
Keep the package sealed after opening
Recommended storage temperature is 0 to 35 Degree C
Shelf life is 2 years under proper storage conditions
Water soluble, non flammable and non explosive under normal storage conditions

Bluwat Factory Supply Capability

Bluwat Chemicals is a professional manufacturer and exporter of polyacrylamide and water treatment chemicals with more than 25 years of manufacturing experience.

Bluwat supplies anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide and emulsion polyacrylamide for oilfield drilling, EOR, wastewater treatment, mining, papermaking, municipal sewage treatment and sludge dewatering.

For oilfield customers, Bluwat can provide product selection advice, sample support, technical documents and customized PAM grades according to drilling fluid formulation, target performance and field conditions.

Available Documents

Technical Documents

TDS available
MSDS available
COA available

Buyer Support

Sample support available
OEM packaging available
Customized product recommendation available

FAQ

What is oilfield grade polyacrylamide powder used for?

Oilfield grade polyacrylamide powder is used for drilling fluid loss control, shale stabilization, viscosity support, lubrication improvement, cuttings suspension and selected oilfield wastewater treatment applications.

What is the recommended working concentration?

The recommended working concentration is 0.1 to 0.5 percent.

Can this product reduce drilling fluid loss?

Yes. It can help improve drilling mud structure and support fluid loss control in water based drilling fluid systems.

Is it suitable for water based drilling mud?

Yes. BLUFLOC oilfield grade PAM is suitable for water based drilling mud systems where filtration control, viscosity and stability are required.

Can it improve borehole stability?

Yes. By supporting fluid loss control, mud viscosity and shale stabilization, it can help improve borehole stability in sensitive formations.

How long does the powder need to dissolve?

Normally it takes about 1 hour under proper agitation conditions.

What agitation speed is recommended?

The recommended agitation speed is 200 to 400 rpm.

Can it be used directly as dry powder?

For best performance, it should be dissolved into a 0.1 to 0.5 percent solution before dosing. Direct dry powder addition may cause lumping and uneven performance.

Can Bluwat recommend the suitable grade?

Yes. Bluwat can recommend HA7525, AA6518 or other customized anionic PAM grades according to drilling fluid requirements and field conditions.

Need Oilfield Grade PAM for Drilling Fluid Loss Control?

BLUFLOC Oilfield Grade Polyacrylamide Powder supports water based drilling mud fluid loss control, shale stabilization, viscosity improvement, lubrication support and cuttings suspension. Bluwat can provide factory direct supply, technical documents, sample support and customized PAM grade selection for oilfield customers.

Tags:

Wasser-Reinigungs-Chemikalien

Wasser Decoloring-Mittel

Anionisches Polyacrylamid

Kationischen Polyacrylamid

Polyaluminiumchlorid

Quaternäres Ammonium-Polymer

Nichtionisches Polyacrylamid

Farbabbau-Chemikalie

Bohrspülung Zusatzstoffe

Dicyandiamide-Formaldehyd-Harz

Polyelektrolyt-Flockungsmittel

Eisensulfat

Farbhaftmittel

Gerinnungsmittel und Flockungsmittel

Anlage basiertes desodorierendes Mittel

Chemikalien gegen Schaumbildung

Chemisches Demulsifier